Meters to Feet
1 meter = 3.28084 feet (ft)
Convert meters to feet instantly. 1 meter = 3.28084 feet. Free, accurate, with conversion table and formula.
Meter (m)
Foot (ft)
| Unit | 1 m equals |
|---|---|
| Nanometer (nm) | 1.00000e+9 |
| Micrometer (µm) | 1.00000e+6 |
| Millimeter (mm) | 1,000 |
| Centimeter (cm) | 100 |
| Meter (m) | 1 |
| Kilometer (km) | 0.001 |
| Inch (in) | 39.3701 |
| Foot (ft) | 3.28084 |
| Yard (yd) | 1.09361 |
| Mile (mi) | 0.000621371 |
| Nautical Mile (nmi) | 0.000539957 |
How to convert meters to feet
- 1Take your value in meters (m).
- 2Multiply by 3.28084.
- 3The result is your value in feet (ft).
Meters to Feet conversion table
| Meters (m) | Feet (ft) |
|---|---|
| 1 | 3.28084 |
| 2 | 6.56168 |
| 5 | 16.4042 |
| 10 | 32.8084 |
| 25 | 82.021 |
| 50 | 164.042 |
| 100 | 328.084 |
| 250 | 820.21 |
| 500 | 1,640.42 |
| 1,000 | 3,280.84 |
Frequently asked
How many feet are in a meter?
1 meter equals 3.28084 feet (ft).
How do I convert meters to feet?
Multiply the number of meters by 3.28084 to get feet.
What is 10 meters in feet?
10 m equals 32.81 ft.
What is 100 meters in feet?
100 m equals 328.1 ft.
How do I convert feet back to meters?
Multiply feet by 0.3048 (the reciprocal) or use the swap button above.
Where you'll actually use this
Length measurements describe how far apart two points are along a straight line. The metric system uses the meter as its base unit, while imperial systems rely on inches, feet, yards, and miles.
- Construction & DIY
Floor plans, lumber lengths, drywall sheets, and fixture clearances all swap between metric and imperial depending on supplier and region.
- Travel & navigation
Convert driving distances from kilometers to miles when crossing borders or comparing routes on different map services.
- Sports & fitness
Running splits, swim distances, and track events bounce between meters, yards, and miles depending on the event format.
- International shopping
TV diagonals, monitor sizes, fabric, and shoe measurements are quoted in inches, cm, or mm by region.
Common mistakes to avoid
- Mixing up cm and m
100 cm equals 1 m. A common error is reading 1.5 m as 15 cm — always check the decimal place.
- Foot vs feet symbol
Single quote (′) means feet, double (″) means inches. 5′10″ is five feet ten inches, not feet-and-feet.
- Statute vs nautical miles
A nautical mile (1,852 m) is about 15% longer than a statute mile (1,609 m). Used for sea and air navigation.
Did you know?
Since 2019 the meter is defined by the speed of light — exactly 1/299,792,458 of a second of travel.
The Roman mile was 1,000 paces (mille passus). The English mile was later standardized to 8 furlongs of 660 feet each.
History & context
The metric system was adopted by France in 1795 and now serves as the legal measurement system in nearly every country. The US, Liberia, and Myanmar remain the only nations still officially using imperial units for daily measurement.
Related conversions
What people do next
Curated handoffs from this tool — picked, not guessed.
Your next conversion is one tap away.
Trending tools, your recent picks, and smart suggestions — curated, not cluttered.